// SPDX-License-Identifier: GPL-2.0-or-later /* * GE SBC610 board support * * Author: Martyn Welch * * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) * Copyright 2006 Freescale Semiconductor Inc. * * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mpc86xx.h" #undef DEBUG #ifdef DEBUG #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0) #else #define DBG (fmt...) do { } while (0) #endif void __iomem *sbc610_regs; static void __init gef_sbc610_init_irq(void) { struct device_node *cascade_node = NULL; mpc86xx_init_irq(); /* * There is a simple interrupt handler in the main FPGA, this needs * to be cascaded into the MPIC */ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); if (!cascade_node) { printk(KERN_WARNING "SBC610: No FPGA PIC\n"); return; } gef_pic_init(cascade_node); of_node_put(cascade_node); } static void __init gef_sbc610_setup_arch(void) { struct device_node *regs; printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif fsl_pci_assign_primary(); /* Remap basic board registers */ regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); if (regs) { sbc610_regs = of_iomap(regs, 0); if (sbc610_regs == NULL) printk(KERN_WARNING "Unable to map board registers\n"); of_node_put(regs); } #if defined(CONFIG_MMIO_NVRAM) mmio_nvram_init(); #endif } /* Return the PCB revision */ static unsigned int gef_sbc610_get_pcb_rev(void) { unsigned int reg; reg = ioread32(sbc610_regs); return (reg >> 8) & 0xff; } /* Return the board (software) revision */ static unsigned int gef_sbc610_get_board_rev(void) { unsigned int reg; reg = ioread32(sbc610_regs); return (reg >> 16) & 0xff; } /* Return the FPGA revision */ static unsigned int gef_sbc610_get_fpga_rev(void) { unsigned int reg; reg = ioread32(sbc610_regs); return (reg >> 24) & 0xf; } static void gef_sbc610_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), ('A' + gef_sbc610_get_board_rev() - 1)); seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); } static void gef_sbc610_nec_fixup(struct pci_dev *pdev) { unsigned int val; /* Do not do the fixup on other platforms! */ if (!machine_is(gef_sbc610)) return; printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ pci_read_config_dword(pdev, 0xe0, &val); pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); /* System clock is 48-MHz Oscillator and EHCI Enabled. */ pci_write_config_dword(pdev, 0xe4, 1 << 5); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, gef_sbc610_nec_fixup); machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices); define_machine(gef_sbc610) { .name = "GE SBC610", .compatible = "gef,sbc610", .setup_arch = gef_sbc610_setup_arch, .init_IRQ = gef_sbc610_init_irq, .show_cpuinfo = gef_sbc610_show_cpuinfo, .get_irq = mpic_get_irq, .time_init = mpc86xx_time_init, .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif };