// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Konrad Dybcio */ #include #include #include "sm8350.dtsi" #include "pm8350.dtsi" #include "pm8350b.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" #include "pmr735a.dtsi" #include "pmr735b.dtsi" / { /* * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350! * Adding it will cause the bootloader to go crazy and randomly crash * shortly after closing UEFI boot services.. Perhaps that has something * to do with the OS running inside a VM now..? */ chassis-type = "handset"; chosen { #address-cells = <2>; #size-cells = <2>; ranges; framebuffer: framebuffer@e1000000 { compatible = "simple-framebuffer"; reg = <0 0xe1000000 0 0x2300000>; /* The display, even though it's 4K, initializes at 1080-ish p */ width = <1096>; height = <2560>; stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's (going to be) a lot of clocks, but it's necessary due * to unused clk cleanup & no panel driver yet */ clocks = <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; key-camera-focus { label = "Camera Focus"; linux,code = ; gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; wakeup-source; }; key-camera-snapshot { label = "Camera Snapshot"; linux,code = ; gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; wakeup-source; }; key-google-assist { label = "Google Assistant Key"; gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <15>; linux,can-disable; wakeup-source; }; key-vol-down { label = "Volume Down"; linux,code = ; gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; wakeup-source; }; }; reserved-memory { cont_splash_mem: memory@e1000000 { reg = <0 0xe1000000 0 0x2300000>; no-map; }; ramoops@ffc00000 { compatible = "ramoops"; reg = <0 0xffc00000 0 0x100000>; console-size = <0x40000>; record-size = <0x1000>; no-map; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; regulator-boot-on; }; }; &adsp { status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-s11-supply = <&vph_pwr>; vdd-s12-supply = <&vph_pwr>; vdd-l1-l4-supply = <&pm8350_s11>; vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_bob>; vdd-l6-l9-l10-supply = <&pm8350_s11>; /* * ARC regulators: * S5 - mx.lvl * S6 - gfx.lvl * S9 - mxc.lvl */ pm8350_s10: smps10 { regulator-name = "pm8350_s10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; pm8350_s11: smps11 { regulator-name = "pm8350_s11"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <1000000>; regulator-initial-mode = ; }; pm8350_s12: smps12 { regulator-name = "pm8350_s12"; regulator-min-microvolt = <1224000>; regulator-max-microvolt = <1360000>; regulator-initial-mode = ; }; pm8350_l1: ldo1 { regulator-name = "pm8350_l1"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; }; pm8350_l2: ldo2 { regulator-name = "pm8350_l2"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; pm8350_l3: ldo3 { regulator-name = "pm8350_l3"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <904000>; regulator-initial-mode = ; }; /* L4 - lmx.lvl (ARC) */ pm8350_l5: ldo5 { regulator-name = "pm8350_l5"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <888000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; pm8350_l6: ldo6 { regulator-name = "pm8350_l6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; pm8350_l7: ldo7 { regulator-name = "pm8350_l7"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; /* L8 - lcx.lvl (ARC) */ pm8350_l9: ldo9 { regulator-name = "pm8350_l9"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-l1-l12-supply = <&pm8350c_s1>; vdd-l2-l8-supply = <&pm8350c_s1>; vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; vdd-l6-l9-l11-supply = <&vreg_bob>; vdd-l10-supply = <&pm8350_s12>; vdd-bob-supply = <&vph_pwr>; pm8350c_s1: smps1 { regulator-name = "pm8350c_s1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1952000>; regulator-initial-mode = ; }; /* S2 - ebi.lvl (ARC) */ pm8350c_s3: smps3 { regulator-name = "pm8350c_s3"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <704000>; regulator-initial-mode = ; }; /* * ARC regulators: * S4 - mss.lvl * S6 - cx.lvl * S8 - mmcx.lvl */ pm8350c_s10: smps10 { regulator-name = "pm8350c_s10"; regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1128000>; regulator-initial-mode = ; }; pm8350c_l1: ldo1 { regulator-name = "pm8350c_l1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; pm8350c_l2: ldo2 { regulator-name = "pm8350c_l2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; pm8350c_l3: ldo3 { regulator-name = "pm8350c_l3"; regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = ; }; pm8350c_l4: ldo4 { regulator-name = "pm8350c_l4"; regulator-min-microvolt = <1704000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; pm8350c_l5: ldo5 { regulator-name = "pm8350c_l5"; regulator-min-microvolt = <1704000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; pm8350c_l6: ldo6 { regulator-name = "pm8350c_l6"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; pm8350c_l7: ldo7 { regulator-name = "pm8350c_l7"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; pm8350c_l8: ldo8 { regulator-name = "pm8350c_l8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; pm8350c_l9: ldo9 { regulator-name = "pm8350c_l9"; regulator-min-microvolt = <2960000>; /* Originally max = 3008000 but SDHCI expects 2960000 */ regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; pm8350c_l10: ldo10 { regulator-name = "pm8350c_l10"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; pm8350c_l11: ldo11 { regulator-name = "pm8350c_l11"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; pm8350c_l12: ldo12 { regulator-name = "pm8350c_l12"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; pm8350c_l13: ldo13 { regulator-name = "pm8350c_l13"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; vreg_bob: bob { regulator-name = "vreg_bob"; regulator-min-microvolt = <3400000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; }; /* TODO: Add pm8350b (just one ldo) once the driver part is in */ regulators-2 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-l1-l2-supply = <&pmr735a_s2>; vdd-l3-supply = <&pmr735a_s1>; vdd-l4-supply = <&pm8350c_s1>; vdd-l5-l6-supply = <&pm8350c_s1>; vdd-l7-bob-supply = <&vreg_bob>; pmr735a_s1: smps1 { regulator-name = "pmr735a_s1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1280000>; }; pmr735a_s2: smps2 { regulator-name = "pmr735a_s2"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <976000>; }; pmr735a_s3: smps3 { regulator-name = "pmr735a_s3"; regulator-min-microvolt = <2208000>; regulator-max-microvolt = <2352000>; }; pmr735a_l1: ldo1 { regulator-name = "pmr735a_l1"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; }; pmr735a_l2: ldo2 { regulator-name = "pmr735a_l2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; pmr735a_l3: ldo3 { regulator-name = "pmr735a_l3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; pmr735a_l4: ldo4 { regulator-name = "pmr735a_l4"; regulator-min-microvolt = <1776000>; regulator-max-microvolt = <1872000>; }; pmr735a_l5: ldo5 { regulator-name = "pmr735a_l5"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; pmr735a_l6: ldo6 { regulator-name = "pmr735a_l6"; regulator-min-microvolt = <480000>; regulator-max-microvolt = <904000>; }; pmr735a_l7: ldo7 { regulator-name = "pmr735a_l7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; }; }; &cdsp { status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; }; &i2c1 { status = "okay"; clock-frequency = <1000000>; /* Some subset of SONY IMX663 camera sensor @ 38 */ }; &i2c4 { status = "okay"; clock-frequency = <400000>; /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ }; &i2c11 { status = "okay"; clock-frequency = <1000000>; cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; reg = <0x40>; interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; cirrus,boost-peak-milliamp = <4000>; cirrus,boost-ind-nanohenry = <1000>; cirrus,boost-cap-microfarad = <15>; cirrus,asp-sdout-hiz = <3>; cirrus,gpio2-src-select = <2>; cirrus,gpio2-output-enable; #sound-dai-cells = <1>; }; cs35l41_r: speaker-amp@41 { compatible = "cirrus,cs35l41"; reg = <0x41>; interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; cirrus,boost-peak-milliamp = <4000>; cirrus,boost-ind-nanohenry = <1000>; cirrus,boost-cap-microfarad = <15>; cirrus,asp-sdout-hiz = <3>; cirrus,gpio2-src-select = <2>; cirrus,gpio2-output-enable; #sound-dai-cells = <1>; }; }; &i2c12 { status = "okay"; /* Clock frequency was not specified downstream, let's park it to 100 KHz */ clock-frequency = <100000>; /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; &i2c13 { status = "okay"; /* Clock frequency was not specified downstream, let's park it to 100 KHz */ clock-frequency = <100000>; /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ }; &i2c15 { status = "okay"; clock-frequency = <400000>; /* NXP SN1X0 NFC @ 28 */ }; &i2c17 { status = "okay"; clock-frequency = <1000000>; /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ }; &ipa { qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn"; status = "okay"; }; &mpss { status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; }; &pm8350_gpios { gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ "LCD_ID", "SDR_MMW_THERM", "RF_ID", "NC", "FP_LDO_EN", "SP_ARI_PWR_ALARM", "NC", "G_ASSIST_N", "PM8350_OPTION"; /* GPIO_10 */ g_assist_n: g-assist-n-state { pins = "gpio9"; function = "normal"; power-source = <1>; bias-pull-up; input-enable; }; }; &pm8350b_gpios { snapshot_n: snapshot-n-state { pins = "gpio5"; function = "normal"; power-source = <0>; bias-pull-up; input-enable; }; focus_n: focus-n-state { pins = "gpio8"; function = "normal"; power-source = <0>; input-enable; bias-pull-up; }; }; &pmk8350_gpios { gpio-line-names = "NC", /* GPIO_1 */ "NC", "VOL_DOWN_N", "PMK8350_OPTION"; vol_down_n: vol-down-n-state { pins = "gpio3"; function = "normal"; power-source = <0>; bias-pull-up; input-enable; }; }; &pmk8350_rtc { status = "okay"; }; &pon_pwrkey { status = "okay"; }; &pon_resin { status = "okay"; linux,code = ; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &qupv3_id_2 { status = "okay"; }; &sdhc_2 { cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>; pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>; vmmc-supply = <&pm8350c_l9>; vqmmc-supply = <&pm8350c_l6>; no-sdio; no-mmc; status = "okay"; }; &slpi { status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; }; &spi14 { status = "okay"; /* NXP SN1X0 NFC Secure Element @ 0 */ }; &tlmm { gpio-reserved-ranges = <44 4>; gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ "APPS_I2C_0_SCL", "UWIDEC_PWR_EN", "HAP_RST_N", "NC", "NC", "PM8008_1_RESET_N", "NC", "OIS_TELE_I2C_SDA", "OIS_TELE_I2C_SCL", "PM8350_OPTION", /* GPIO_10 */ "NC", "APPS_I2C_1_SDA", "APPS_I2C_1_SCL", "NC", "NC", "CAM1_RESET_N", "LEO_CAM0_RESET_N", "DEBUG_UART_TX", "DEBUG_UART_RX", "TS_I2C_SDA", /* GPIO_20 */ "TS_I2C_SCL", "TS_RESET_N", "TS_INT_N", "DISP_RESET_N", "SW_SERVICE", "DISP_ERR_FG", "TX_GTR_THRES_IN", "NC", "NC", "NC", /* GPIO_30 */ "NC", "NC", "NC", "NC", "NC", "SPK_AMP_INT_N", "SPK_AMP_RESET_N", "FP_INT_N", "FP_RESET_N", "NC", /* GPIO_40 */ "NC", "DEBUG_GPIO0", "FORCE_USB_BOOT", "FP_SPI_MISO", "FP_SPI_MOSI", "FP_SPI_CLK", "FP_SPI_CS_N", "SPK_AMP_I2C_SDA", "SPK_AMP_I2C_SCL", "NC", /* GPIO_50 */ "HAP_INT_N", "CAMSENSOR_I2C_SDA", "CAMSENSOR_I2C_SCL", "SBU_SW_OE", "SBU_SW_SEL", "NFC_ESE_SPI_MISO", "NFC_ESE_SPI_MOSI", "NFC_ESE_SPI_CLK", "NFC_ESE_SPI_CS", "NFC_I2C_SDA", /* GPIO_60 */ "NFC_I2C_SCL", "NFC_EN", "NFC_CLK_REQ", "HST_WLAN_EN", "HST_BT_EN", "HW_ID_0", "HW_ID_1", "HST_BT_UART_CTS", "HST_BT_UART_RFR", "HST_BT_UART_TX", /* GPIO_70 */ "HST_BT_UART_RX", "HAP_I2C_SDA", "HAP_I2C_SCL", "RF_LCD_ID_EN", "RF_ID_EXTENSION", "NC", "NC", "NC", "NC", "HALL_INT_N", /* GPIO_80 */ "USB_CC_DIR", "DISP_VSYNC", "NC", "NC", "CAM_SOF_TELE", "NFC_DWL_REQ", "NFC_IRQ", "WCD_RST_N", "ALS_PROX_INT_N", "NC", /* GPIO_90 */ "NC", "TRAY_DET", "UDON_SWITCH_SEL", "PCIE0_RESET_N", "PCIE0_CLK_REQ_N", "PCIE0_WAKE_N", "CAM_SOF", "RF_ID_EXTENSION_2", "RGBC_IR_INT", "CAM_MCLK0", /* GPIO_100 */ "CAM_MCLK1", "CAM_MCLK2", "CAM_MCLK3", "NC", "NC", "CAM2_RESET_N", "CCI_I2C0_SDA", "CCI_I2C0_SCL", "CCI_I2C1_SDA", "CCI_I2C1_SCL", /* GPIO_110 */ "CCI_I2C2_SDA", "CCI_I2C2_SCL", "CCI_I2C3_SDA", "CCI_I2C3_SCL", "NC", "PM8008_1_IRQ", "CAM3_RESET_N", "IMU1_INT", "EXT_VD0_XVS", "NC", /* GPIO_120 */ "NC", "NC", "NC", "NC", "HAP_I2S_CLK", "HAP_I2S_DOUT", "HAP_TRG1", "HAP_I2S_SYNC", "HST_BT_WLAN_SLIMBUS_CLK", "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ "NC", "UIM2_DETECT_EN", "UIM2_DATA", "UIM2_CLK", "UIM2_RESET", "UIM2_PRESENT", "UIM1_DATA", "UIM1_CLK", "UIM1_RESET", "TRAY_DET", /* GPIO_140 */ "SM_RFFE0_CLK", "SM_RFFE0_DATA", "SM_RFFE1_CLK", "SM_RFFE1_DATA", "SM_MSS_GRFC4", "SM_MSS_GRFC5", "SM_MSS_GRFC6", "SM_MSS_GRFC7", "SM_RFFE4_CLK", "SM_RFFE4_DATA", /* GPIO_150 */ "WLAN_COEX_UART1_RX", "WLAN_COEX_UART1_TX", "HST_SW_CTRL", "DISP_VDDR_EN", "NC", "NC", "PA_INDICATOR_OR", "NC", "QLINK0_REQ", "QLINK0_EN", /* GPIO_160 */ "QLINK0_WMSS_RESET_N", "NC", "NC", "NC", "PM8008_2_IRQ", "TELEC_PWR_EN", "PM8008_2_RESET_N", "WCD_SWR_TX_CLK", "WCD_SWR_TX_DATA0", "WCD_SWR_TX_DATA1", /* GPIO_170 */ "WCD_SWR_RX_CLK", "WCD_SWR_RX_DATA0", "WCD_SWR_RX_DATA1", "SM_DMIC1_CLK", "SM_DMIC1_DATA", "SM_DMIC2_CLK", "SM_DMIC2_DATA", "SPK_AMP_I2S_CLK", "SPK_AMP_I2S_WS", "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ "SPK_AMP_I2S_ASP_DOUT", "WCD_SWR_TX_DATA2", "NC", "NC", "NC", "NC", "IMU_SPI_MISO", "IMU_SPI_MOSI", "IMU_SPI_CLK", "IMU_SPI_CS_N", /* GPIO_190 */ "MAG_I2C_SDA", "MAG_I2C_SCL", "SENSOR_I2C_SDA", "SENSOR_I2C_SCL", "NC", "NC", "NC", "NC", "HST_BLE_UART_TX", "HST_BLE_UART_RX", /* GPIO_200 */ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; ts_int_default: ts-int-default-state { pins = "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; sdc2_card_det_active: sd-card-det-active-state { pins = "gpio92"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; sdc2_card_det_sleep: sd-card-det-sleep-state { pins = "gpio92"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ &ufs_mem_hc { status = "disabled"; }; &ufs_mem_phy { status = "disabled"; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "peripheral"; }; &usb_1_hsphy { status = "okay"; vdda-pll-supply = <&pm8350_l5>; vdda18-supply = <&pm8350c_l1>; vdda33-supply = <&pm8350_l2>; }; &usb_1_qmpphy { status = "okay"; vdda-phy-supply = <&pm8350_l6>; vdda-pll-supply = <&pm8350_l1>; };