// SPDX-License-Identifier: GPL-2.0 /* * SDM845 LG G7 / V35 (judyln / judyp) common device tree * * Copyright (c) 2022, The Linux Foundation. All rights reserved. */ #include #include #include #include "sdm845.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" /delete-node/ &adsp_mem; /delete-node/ &cdsp_mem; /delete-node/ &gpu_mem; /delete-node/ &ipa_fw_mem; /delete-node/ &mba_region; /delete-node/ &mpss_region; /delete-node/ &qseecom_mem; /delete-node/ &rmtfs_mem; /delete-node/ &slpi_mem; /delete-node/ &spss_mem; /delete-node/ &venus_mem; /delete-node/ &wlan_msa_mem; / { chosen { #address-cells = <2>; #size-cells = <2>; ranges; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; qseecom_mem: memory@b2000000 { reg = <0 0xb2000000 0 0x1800000>; no-map; }; gpu_mem: memory@8c415000 { reg = <0 0x8c415000 0 0x2000>; no-map; }; ipa_fw_mem: memory@8c400000 { reg = <0 0x8c400000 0 0x10000>; no-map; }; adsp_mem: memory@8c500000 { reg = <0 0x8c500000 0 0x1e00000>; no-map; }; wlan_msa_mem: memory@8e300000 { reg = <0 0x8e300000 0 0x100000>; no-map; }; mpss_region: memory@8e400000 { reg = <0 0x8e400000 0 0x8900000>; no-map; }; venus_mem: memory@96d00000 { reg = <0 0x96d00000 0 0x500000>; no-map; }; cdsp_mem: memory@97200000 { reg = <0 0x97200000 0 0x800000>; no-map; }; mba_region: memory@97a00000 { reg = <0 0x97a00000 0 0x200000>; no-map; }; slpi_mem: memory@97c00000 { reg = <0 0x97c00000 0 0x1400000>; no-map; }; spss_mem: memory@99000000 { reg = <0 0x99000000 0 0x100000>; no-map; }; /* Framebuffer region */ memory@9d400000 { reg = <0x0 0x9d400000 0x0 0x2400000>; no-map; }; /* rmtfs lower guard */ memory@f0800000 { reg = <0 0xf0800000 0 0x1000>; no-map; }; rmtfs_mem: memory@f0801000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf0801000 0 0x200000>; no-map; qcom,client-id = <1>; qcom,vmid = ; }; /* rmtfs upper guard */ memory@f0a01000 { reg = <0 0xf0a01000 0 0x1000>; no-map; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>; label = "GPIO Buttons"; key-vol-up { label = "Volume up"; linux,code = ; gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; /* * Apparently RPMh does not provide support for PM8998 S4 because it * is always-on; model it as a fixed regulator. */ vreg_s4a_1p8: pm8998-smps4-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; vin-supply = <&vph_pwr>; }; }; &adsp_pas { status = "okay"; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-s11-supply = <&vph_pwr>; vdd-s12-supply = <&vph_pwr>; vdd-s13-supply = <&vph_pwr>; vdd-l1-l27-supply = <&vreg_s7a_1p025>; vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; vdd-l3-l11-supply = <&vreg_s7a_1p025>; vdd-l4-l5-supply = <&vreg_s7a_1p025>; vdd-l6-supply = <&vph_pwr>; vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; vdd-l9-supply = <&vreg_bob>; vdd-l10-l23-l25-supply = <&vreg_bob>; vdd-l13-l19-l21-supply = <&vreg_bob>; vdd-l16-l28-supply = <&vreg_bob>; vdd-l18-l22-supply = <&vreg_bob>; vdd-l20-l24-supply = <&vreg_bob>; vdd-l26-supply = <&vreg_s3a_1p35>; vin-lvs-1-2-supply = <&vreg_s4a_1p8>; vreg_s2a_1p125: smps2 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; vreg_s3a_1p35: smps3 { regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; vreg_s5a_2p04: smps5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; vreg_s7a_1p025: smps7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; vdd_qusb_hs0: vdda_hp_pcie_core: vdda_mipi_csi0_0p9: vdda_mipi_csi1_0p9: vdda_mipi_csi2_0p9: vdda_mipi_dsi0_pll: vdda_mipi_dsi1_pll: vdda_qlink_lv: vdda_qlink_lv_ck: vdda_qrefs_0p875: vdda_pcie_core: vdda_pll_cc_ebi01: vdda_pll_cc_ebi23: vdda_sp_sensor: vdda_ufs1_core: vdda_ufs2_core: vdda_usb1_ss_core: vdda_usb2_ss_core: vreg_l1a_0p875: ldo1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; }; vddpx_10: vreg_l2a_1p2: ldo2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-always-on; }; vreg_l3a_1p0: ldo3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-initial-mode = ; }; vdd_wcss_cx: vdd_wcss_mx: vdda_wcss_pll: vreg_l5a_0p8: ldo5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; regulator-initial-mode = ; }; vddpx_13: vreg_l6a_1p8: ldo6 { regulator-min-microvolt = <1856000>; regulator-max-microvolt = <1856000>; regulator-initial-mode = ; }; vreg_l7a_1p8: ldo7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l8a_1p2: ldo8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1248000>; regulator-initial-mode = ; }; vreg_l9a_1p8: ldo9 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <2928000>; regulator-initial-mode = ; }; vreg_l10a_1p8: ldo10 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <2928000>; regulator-initial-mode = ; }; vreg_l11a_1p0: ldo11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1048000>; regulator-initial-mode = ; }; vdd_qfprom: vdd_qfprom_sp: vdda_apc1_cs_1p8: vdda_gfx_cs_1p8: vdda_qrefs_1p8: vdda_qusb_hs0_1p8: vddpx_11: vreg_l12a_1p8: ldo12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vddpx_2: vreg_l13a_2p95: ldo13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; vreg_l14a_1p88: ldo14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1880000>; regulator-initial-mode = ; }; vreg_l15a_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l17a_1p3: ldo17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = ; }; vreg_l18a_2p7: ldo18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; vreg_l20a_2p95: ldo20 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; vreg_l21a_2p95: ldo21 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; vreg_l22a_2p85: ldo22 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l23a_3p3: ldo23 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3312000>; regulator-initial-mode = ; }; vdda_qusb_hs0_3p1: vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; regulator-initial-mode = ; }; vreg_l25a_3p3: ldo25 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3312000>; regulator-initial-mode = ; }; vdda_hp_pcie_1p2: vdda_hv_ebi0: vdda_hv_ebi1: vdda_hv_ebi2: vdda_hv_ebi3: vdda_mipi_csi_1p25: vdda_mipi_dsi0_1p2: vdda_mipi_dsi1_1p2: vdda_pcie_1p2: vdda_ufs1_1p2: vdda_ufs2_1p2: vdda_usb1_ss_1p2: vdda_usb2_ss_1p2: vreg_l26a_1p2: ldo26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l28a_3p0: ldo28 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_lvs1a_1p8: lvs1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vreg_lvs2a_1p8: lvs2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; }; regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; vdd-bob-supply = <&vph_pwr>; vreg_bob: bob { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3600000>; regulator-initial-mode = ; regulator-allow-bypass; }; }; regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vreg_s3c_0p6: smps3 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <600000>; }; }; }; &cdsp_pas { status = "okay"; }; &dispcc { status = "disabled"; }; &gcc { protected-clocks = , , , , ; }; &gpu { status = "okay"; zap-shader { memory-region = <&gpu_mem>; }; }; &ipa { qcom,gsi-loader = "modem"; status = "okay"; }; &mss_pil { status = "okay"; }; &pm8998_resin { linux,code = ; status = "okay"; }; &sdhc_2 { status = "okay"; cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vddpx_2>; }; /* * UFS works partially and only with clk_ignore_unused. * Sometimes it crashes with I/O errors. */ &ufs_mem_hc { status = "okay"; reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l20a_2p95>; vcc-max-microamp = <600000>; }; &ufs_mem_phy { status = "okay"; vdda-phy-supply = <&vdda_ufs1_core>; vdda-pll-supply = <&vdda_ufs1_1p2>; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { /* TODO: these devices have usb id pin */ dr_mode = "peripheral"; }; &usb_1_hsphy { status = "okay"; vdd-supply = <&vdda_usb1_ss_core>; vdda-pll-supply = <&vdda_qusb_hs0_1p8>; vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; qcom,imp-res-offset-value = <8>; qcom,hstx-trim-value = ; qcom,preemphasis-level = ; qcom,preemphasis-width = ; }; &usb_1_qmpphy { status = "okay"; vdda-phy-supply = <&vdda_usb1_ss_1p2>; vdda-pll-supply = <&vdda_usb1_ss_core>; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &tlmm { gpio-reserved-ranges = <28 4>, <81 4>; sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; bias-disable; /* * It seems that mmc_test reports errors if drive * strength is not 16 on clk, cmd, and data pins. * * TODO: copy-pasted from mtp, try other values * on these devices. */ drive-strength = <16>; }; sdc2_cmd: sdc2-cmd-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <16>; }; sdc2_data: sdc2-data-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <16>; }; sd_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; }; &pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; bias-pull-up; qcom,drive-strength = ; }; };