// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2024, Linaro Limited */ /dts-v1/; #include #include #include "sar2130p.dtsi" #include "pm8150.dtsi" / { model = "Qualcomm Snapdragon AR2 Gen1 Smart Viewer Development Kit"; compatible = "qcom,qar2130p", "qcom,sar2130p"; chassis-type = "embedded"; aliases { serial0 = &uart11; serial1 = &uart7; i2c0 = &i2c8; i2c1 = &i2c10; mmc1 = &sdhc_1; spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; }; /* pm3003a on I2C0, should not be controlled */ vreg_ext_1p3: regulator-ext-1p3 { compatible = "regulator-fixed"; regulator-name = "vph_ext_1p3"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; regulator-always-on; vin-supply = <&vph_pwr>; }; /* EBI rail, used as LDO input, can not be part of PMIC config */ vreg_s10a_0p89: regulator-s10a-0p89 { compatible = "regulator-fixed"; regulator-name = "vph_s10a_0p89"; regulator-min-microvolt = <890000>; regulator-max-microvolt = <890000>; regulator-always-on; vin-supply = <&vph_pwr>; }; thermal-zones { sar2130p-thermal { thermal-sensors = <&pm8150_adc_tm 1>; trips { active-config0 { temperature = <100000>; hysteresis = <1000>; type = "critical"; }; }; }; wifi-thermal { thermal-sensors = <&pm8150_adc_tm 2>; trips { active-config0 { temperature = <52000>; hysteresis = <4000>; type = "passive"; }; }; }; xo-thermal { thermal-sensors = <&pm8150_adc_tm 0>; trips { active-config0 { temperature = <50000>; hysteresis = <4000>; type = "passive"; }; }; }; }; wcn7850-pmu { compatible = "qcom,wcn7850-pmu"; pinctrl-0 = <&wlan_en_state>, <&bt_en_state>; pinctrl-names = "default"; wlan-enable-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; bt-enable-gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s4a_0p95>; vddio-supply = <&vreg_l15a_1p8>; vddaon-supply = <&vreg_s4a_0p95>; vdddig-supply = <&vreg_s4a_0p95>; vddrfa1p2-supply = <&vreg_s4a_0p95>; vddrfa1p8-supply = <&vreg_s5a_1p88>; regulators { vreg_pmu_rfa_cmn: ldo0 { regulator-name = "vreg_pmu_rfa_cmn"; }; vreg_pmu_aon_0p59: ldo1 { regulator-name = "vreg_pmu_aon_0p59"; }; vreg_pmu_wlcx_0p8: ldo2 { regulator-name = "vreg_pmu_wlcx_0p8"; }; vreg_pmu_wlmx_0p85: ldo3 { regulator-name = "vreg_pmu_wlmx_0p85"; }; vreg_pmu_btcmx_0p85: ldo4 { regulator-name = "vreg_pmu_btcmx_0p85"; }; vreg_pmu_rfa_0p8: ldo5 { regulator-name = "vreg_pmu_rfa_0p8"; }; vreg_pmu_rfa_1p2: ldo6 { regulator-name = "vreg_pmu_rfa_1p2"; }; vreg_pmu_rfa_1p8: ldo7 { regulator-name = "vreg_pmu_rfa_1p8"; }; vreg_pmu_pcie_0p9: ldo8 { regulator-name = "vreg_pmu_pcie_0p9"; }; vreg_pmu_pcie_1p8: ldo9 { regulator-name = "vreg_pmu_pcie_1p8"; }; }; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-l1-l8-l11-supply = <&vreg_s4a_0p95>; vdd-l3-l4-l5-l18-supply = <&vreg_ext_1p3>; vdd-l6-l9-supply = <&vreg_s10a_0p89>; vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p88>; vreg_s4a_0p95: smps6 { regulator-name = "vreg_s4a_0p95"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1170000>; regulator-initial-mode = ; }; vreg_s5a_1p88: smps5 { regulator-name = "vreg_s5a_1p88"; regulator-min-microvolt = <1856000>; regulator-max-microvolt = <2040000>; regulator-initial-mode = ; }; vreg_l1a_0p91: ldo1 { regulator-name = "vreg_l1a_0p91"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; }; vreg_l2a_3p1: ldo2 { regulator-name = "vreg_l2a_3p1"; regulator-min-microvolt = <3080000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = ; }; vreg_l3a_1p2: ldo3 { regulator-name = "vreg_l3a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = ; }; /* ldo4 1.26 - system ? */ vreg_l5a_1p13: ldo5 { regulator-name = "vreg_l5a_1p13"; regulator-min-microvolt = <1128000>; regulator-max-microvolt = <1170000>; regulator-initial-mode = ; }; vreg_l6a_0p6: ldo6 { regulator-name = "vreg_l6a_0p6"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <650000>; regulator-initial-mode = ; }; vreg_l7a_1p8: ldo7 { regulator-name = "vreg_l7a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1950000>; regulator-initial-mode = ; }; vreg_l8a_0p88: ldo8 { regulator-name = "vreg_l8a_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <950000>; regulator-initial-mode = ; }; /* ldo9 - LCX */ vreg_l10a_2p95: ldo10 { regulator-name = "vreg_l10a_2p95"; regulator-min-microvolt = <2952000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = ; }; /* ldo11 - LMX */ vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1880000>; regulator-initial-mode = ; }; /* no ldo13 */ vreg_l14a_1p8: ldo14 { regulator-name = "vreg_l14a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1880000>; regulator-initial-mode = ; }; vreg_l15a_1p8: ldo15 { regulator-name = "vreg_l15a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; /* no ldo16 - system */ vreg_l17a_3p26: ldo17 { regulator-name = "vreg_l17a_3p26"; regulator-min-microvolt = <3200000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = ; }; vreg_l18a_1p2: ldo18 { regulator-name = "vreg_l18a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = ; }; }; }; &gpi_dma0 { status = "okay"; }; &gpi_dma1 { status = "okay"; }; &gpu { status = "okay"; }; &gpu_zap_shader { firmware-name = "qcom/sar2130p/a620_zap.mbn"; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &i2c4 { clock-frequency = <400000>; status = "okay"; }; &i2c8 { clock-frequency = <400000>; status = "okay"; ptn3222: redriver@4f { compatible = "nxp,ptn3222"; reg = <0x4f>; reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; vdd3v3-supply = <&vreg_l2a_3p1>; vdd1v8-supply = <&vreg_l15a_1p8>; #phy-cells = <0>; }; }; &i2c10 { clock-frequency = <400000>; status = "okay"; }; &pcie0 { perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; status = "okay"; }; &pcieport0 { wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; }; }; &pcie0_phy { vdda-phy-supply = <&vreg_l8a_0p88>; vdda-pll-supply = <&vreg_l3a_1p2>; status = "okay"; }; &pm8150_adc { channel@4c { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; label = "xo_therm"; }; channel@4d { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; label = "skin_therm"; }; channel@4e { /* msm-5.10 uses ADC5_AMUX_THM2 / 0x0e, although there is a pullup */ reg = ; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; label = "wifi_therm"; }; }; &pm8150_adc_tm { status = "okay"; xo-therm@0 { reg = <0>; io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; }; skin-therm@1 { reg = <1>; io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; }; wifi-therm@2 { reg = <2>; /* msm-5.10 uses ADC5_AMUX_THM2, although there is a pullup */ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; qcom,hw-settle-time-us = <200>; }; }; &remoteproc_adsp { firmware-name = "qcom/sar2130p/adsp.mbn"; status = "okay"; }; &sdhc_1 { vmmc-supply = <&vreg_l10a_2p95>; vqmmc-supply = <&vreg_l7a_1p8>; status = "okay"; }; &tlmm { bt_en_state: bt-enable-state { pins = "gpio46"; function = "gpio"; drive-strength = <16>; bias-disable; }; pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio55"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq-pins { pins = "gpio56"; function = "pcie0_clkreqn"; drive-strength = <2>; bias-pull-up; }; wake-pins { pins = "gpio57"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie1_default_state: pcie1-default-state { perst-pins { pins = "gpio58"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq-pins { pins = "gpio59"; function = "pcie1_clkreqn"; drive-strength = <2>; bias-pull-up; }; wake-pins { pins = "gpio60"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; wlan_en_state: wlan-enable-state { pins = "gpio45"; function = "gpio"; drive-strength = <16>; bias-disable; }; }; &uart7 { status = "okay"; bluetooth { compatible = "qcom,wcn7850-bt"; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; }; }; &uart11 { status = "okay"; }; &usb_1 { status = "okay"; }; &usb_1_hsphy { vdd-supply = <&vreg_l8a_0p88>; vdda12-supply = <&vreg_l3a_1p2>; phys = <&ptn3222>; status = "okay"; }; &usb_dp_qmpphy { vdda-phy-supply = <&vreg_l3a_1p2>; vdda-pll-supply = <&vreg_l1a_0p91>; status = "okay"; };