// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "msm8916-pm8916.dtsi" #include "msm8916-modem-qdsp6.dtsi" #include #include #include #include / { model = "BQ Aquaris X5 (Longcheer L8910)"; compatible = "longcheer,l8910", "qcom,msm8916"; chassis-type = "handset"; aliases { mmc0 = &sdhc_1; /* eMMC */ mmc1 = &sdhc_2; /* SD card */ serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; speaker_amp: audio-amplifier { compatible = "awinic,aw8738"; mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; awinic,mode = <5>; sound-name-prefix = "Speaker Amp"; pinctrl-0 = <&spk_ext_pa_default>; pinctrl-names = "default"; }; flash-led-controller { compatible = "ocs,ocp8110"; enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_front_flash_default>; pinctrl-names = "default"; flash_led: led { function = LED_FUNCTION_FLASH; color = ; flash-max-timeout-us = <250000>; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; label = "GPIO Buttons"; button-volume-up { label = "Volume Up"; gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led-0 { gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; color = ; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; pinctrl-names = "default"; pinctrl-0 = <&button_backlight_default>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; &blsp_i2c2 { status = "okay"; led-controller@30 { compatible = "kinetic,ktd2026"; reg = <0x30>; #address-cells = <1>; #size-cells = <0>; vin-supply = <&pm8916_l17>; vio-supply = <&pm8916_l6>; pinctrl-0 = <&status_led_default>; pinctrl-names = "default"; multi-led { color = ; function = LED_FUNCTION_STATUS; #address-cells = <1>; #size-cells = <0>; led@0 { reg = <0>; color = ; }; led@1 { reg = <1>; color = ; }; led@2 { reg = <2>; color = ; }; }; }; flash-led-controller@53 { compatible = "silergy,sy7802"; reg = <0x53>; enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_rear_flash_default>; pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; led@0 { reg = <0>; function = LED_FUNCTION_FLASH; color = ; led-sources = <0>, <1>; }; }; }; &blsp_i2c3 { status = "okay"; magnetometer@d { compatible = "asahi-kasei,ak09911"; reg = <0x0d>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; }; imu@68 { compatible = "bosch,bmi160"; reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; mount-matrix = "0", "1", "0", "-1", "0", "0", "0", "0", "1"; }; }; &blsp_uart2 { status = "okay"; pinctrl-0 = <&blsp_uart2_console_default>; pinctrl-1 = <&blsp_uart2_console_sleep>; pinctrl-names = "default", "sleep"; }; &mpss_mem { reg = <0x0 0x86800000 0x0 0x5000000>; }; &pm8916_codec { qcom,micbias-lvl = <2800>; qcom,mbhc-vthreshold-low = <75 100 120 180 500>; qcom,mbhc-vthreshold-high = <75 100 120 180 500>; qcom,hphl-jack-type-normally-open; }; &pm8916_gpios { status_led_default: status-led-default-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; power-source = ; bias-disable; output-high; }; }; &pm8916_resin { status = "okay"; linux,code = ; }; &pm8916_rpm_regulators { pm8916_l17: l17 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; }; &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_default &sdc2_cd_default>; pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &sound { /* * Provide widgets/pin-switches to allow enabling speaker separately. * The hardware does not provide a way to disable the output via the * headphone jack when the speaker is enabled. */ model = "bq-paella"; widgets = "Speaker", "Speaker", "Headphone", "Headphones"; pin-switches = "Speaker"; audio-routing = "Speaker", "Speaker Amp OUT", "Speaker Amp IN", "HPH_R", "Headphones", "HPH_L", "Headphones", "HPH_R", "AMIC1", "MIC BIAS External1", "AMIC2", "MIC BIAS Internal2", "AMIC3", "MIC BIAS External1"; aux-devs = <&speaker_amp>; }; &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; }; &usb_hs_phy { extcon = <&usb_id>; }; &venus { status = "okay"; }; &venus_mem { status = "okay"; }; &wcnss { status = "okay"; }; &wcnss_iris { compatible = "qcom,wcn3620"; }; &wcnss_mem { status = "okay"; }; &tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; drive-strength = <2>; bias-disable; }; camera_front_flash_default: camera-front-flash-default-state { pins = "gpio49", "gpio119"; function = "gpio"; drive-strength = <2>; bias-disable; }; camera_rear_flash_default: camera-rear-flash-default-state { pins = "gpio9", "gpio16", "gpio117"; function = "gpio"; drive-strength = <2>; bias-disable; }; gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; mag_reset_default: mag-reset-default-state { pins = "gpio111"; function = "gpio"; drive-strength = <2>; bias-disable; }; sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; drive-strength = <2>; bias-disable; }; spk_ext_pa_default: spk-ext-pa-default-state { pins = "gpio114"; function = "gpio"; drive-strength = <2>; bias-disable; }; usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; };